Characteristics
Frequency conversion handle, freely adjustable substantial capping velocity
Tilted chain board capping, higher speed, tiny noise, large applicability
Automated cap-arranging and screwing, minimizing labor depth
Suitable for all sorts of rotary screw cap,anti-cap theft
one. Adopting linear-connection cap-locking strategy, large creation performance, high applicability
2. Consisting of four pairs (totaling 8) of cap-screwing wheel
3. Each cap-screwing wheel is geared up with digital display to assistance specific changes
4. The 3rd and fourth pairs of cap-screwing wheels are geared up with torque-checking gadgets which assure the good quality of concluded caps
5. A device that checks the existence of aluminium foil is built inside the device and defective products will be kicked out instantly
6. The unit stops when there is no cap or a bottle-blockade.
CZPT Parameters
| Production | 40~one hundred twenty (bottles/min) |
| Adaptable cap size | Φ15~φ60mm |
| Container diameter | Ф20~Ф100mm |
| Sound | ≤70dB |
| Compressed air resource | .5Mpa |
| Power input | AC220V 50Hz/sixty Hz |
| Overall output | one.2Kw |
| CZPT size | 3000mm |
| Capping device dimension | 1200×1400×2200mm |
| Screwing unit dimension | 1550×910×1600mm |
| Capping unit weight (net) | 300Kg |
| Screwing unit weight (web) | 600Kg |
Our other products:
Working Principle
(1)Transmi ssion mechanism: The transmission mechanism is mainly controlled by the high precision inHangCZPT mechanism to control the intermittent rolling of the cleaning roller.
(2)Roller mechanism: The roller mechanism is divided into 6 equal parts, which is controlled by the transmission mechanism for intermittent rolling.
(three)Bottle pulling mechanism: The bottle pulling mechanism is a pair of nylon discs, which is rotated to push 2 to 3 bottles per rotation (The bigger the bottle, the less the cleaning).
(4)working principle:The bottle is conveyed from the pre-equipment to the entrance of the bottle washing machine. Pull in by dial,push into six equal bottle cleaning area, blowing inside by high pressure gas to make fine particles out of the bottle. Repeat cleaning the inner wall of the bottle so that the residue is completely removed.At
last, the bottle is pushed out of the bottle washing machine to the next packing process.
Remember to contact me if you have any concern!
Make sure you go to our websit: www.shxws.internet
